Plateaux pivotants d'alignement avec cadran en laiton, capacité 4 tonnes, accessoires inclus
Plateaux pivotants d'alignement avec cadran en laiton, capacité 4 tonnes, accessoires inclus
Turn plates for wheel alignment.
DIY-friendly turn tables in two profiles. Roll onto them in your home garage and dial in camber and caster yourself.
Built for repeatable results.
Pick a model and hover or tap each point to see how it's built.
0.8" Ultra-Low, Drive-On
Sits low enough to drive onto directly on flat floors. Pair with our ASRP004 ramp level kit for an even smoother transition.
0.8" Ultra-Low, Drive-On
Sits low enough to drive onto directly on flat floors. Pair with our ASRP004 ramp level kit for an even smoother transition.
1.9" Raised, Pit Rack Ready
Drops into pit racks and raised platforms for garages that already have the clearance.
1.9" Raised, Pit Rack Ready
Drops into pit racks and raised platforms for garages that already have the clearance.
Pick the profile for your garage.
Same 4-ton capacity, same brass dial, same 1" offset. The only difference is installation height.
Ultra-Low Profile. Direct Drive-On.
At just 0.8" tall, the ASWG004 drives on flat floors directly. Pair with our ASRP004 ramp level kit for an even smoother transition. Ideal for classic builds, lowered cars, and tight-clearance vehicles.
Raised Profile. Pit Rack & Ramp.
The ASWG008 stands 1.9" tall, built to drop into pit racks and raised platforms where you already have elevated clearance.
ASWG004 vs ASWG008 side by side.
See how both profiles compare and pick the one that fits your garage.
Why AutoSolo turn plates.
Die-cast metal, brass dial, real rotational bearings. Built for your home garage.
4-Ton Capacity Per Plate
Each plate supports up to 4 tons of load, handling 8 tons combined when used as a pair. Die-cast metal construction handles passenger cars, trucks, and SUVs.
±60° Rotation Range
The rotating top plate sweeps a full ±60° left and right from centerline, giving you the range needed for caster sweeps without hitting stops or adapters.
Brass Dial, 1° Increments
An etched brass degree dial you can read from any angle. 1° graduations let you read and record angles during camber and caster adjustments.
1" Centerline Offset
The 13-3/8" rotating top plate includes a 1" slide tolerance from centerline. Accommodates lateral wheel travel during steering input so the tire can move naturally mid-sweep.
Smooth Rotational Bearings
Internal rotational bearings carry the plate weight smoothly under full load. Steering input moves through freely without binding, protecting your caster readings.
Locking Pin & Carry Handle
A built-in locking pin holds the plate at 0° for safe drive-on positioning. Integrated carry handles make moving and storing pairs straightforward.
15.75" × 15.75" Footprint
Compact, uniform dimensions fit standard pit racks and alignment setups. Each plate is lightweight enough for one-person setup in a home garage.
Two Profiles, One Standard
Pick ASWG004 (0.8" ultra-low) for flat-floor drive-on, or ASWG008 (1.9" raised) for pit racks and raised platforms. Both use the same brass dial, bearings, and centerline geometry.
Complete Kit. No Extras Needed.
Every pair ships with transition bridges for smooth drive-on access, wheel chocks for secure positioning, and a user manual. Integrates directly into the AutoSolo alignment system.
Add the rear level platforms.
The drive-on turn plates lift the front wheels. For string toe and thrust, the rear needs to sit at the same height. The ASRP004 adds four drive-on ramps and two rear leveling platforms, sized for the drive-on plates, so all four wheels sit level and the whole setup reads flat.
Tools you can rely on. Support you can reach.
Trusted by DIY Mechanics
Used by home garage enthusiasts, classic car builders, and hobby mechanics worldwide.
Tested in Real Garages
Reviewed by automotive creators and DIY alignment builders across YouTube and beyond.
Backed by U.S. Support
Fast help, product guidance, and friendly support from our U.S.-based team.
1-Year Replacement Support
If any manufacturing defects occur, our team will ship a replacement promptly.
COMMENT FONCTIONNENT LES PLATEAUX PIVOTANTS
Les plateaux pivotants d'alignement des roues sont les plateformes rotatives qui permettent aux roues avant du véhicule de pivoter librement pendant la procédure de géométrie, en éliminant le frottement au sol à l'origine de relevés faussés de parallélisme et de chasse. Les plateaux pivotants AutoSolo existent en deux versions : le modèle Standard, d'environ 2 pouces de hauteur, et le modèle extra-plat, d'environ 1 pouce de hauteur, pour les véhicules à faible garde au sol. Les deux modèles mesurent 15.75 sur 15.75 pouces par plateau. Chaque plateau supporte 2 tonnes de façon indépendante, soit une capacité combinée de 4 tonnes lorsqu'ils sont utilisés par paire. Le cadran finition laiton indique l'angle de braquage jusqu'à 60 degrés à gauche ou à droite de l'axe médian, ce qui donne une référence claire pendant le réglage du parallélisme et de la chasse. Le plateau supérieur rotatif de 13.375 pouces intègre une tolérance de glissement de 1 pouce pour absorber les écarts de voie d'un véhicule à l'autre. Chaque paire est livrée avec deux cales de blocage et deux ponts de transition, sans supplément.
