Platos giratorios de alineación con dial de latón, capacidad de 4 toneladas, con accesorios
Platos giratorios de alineación con dial de latón, capacidad de 4 toneladas, con accesorios
Turn plates for wheel alignment.
DIY-friendly turn tables in two profiles. Roll onto them in your home garage and dial in camber and caster yourself.
Built for repeatable results.
Pick a model and hover or tap each point to see how it's built.
0.8" Ultra-Low, Drive-On
Sits low enough to drive onto directly on flat floors. Pair with our ASRP004 ramp level kit for an even smoother transition.
0.8" Ultra-Low, Drive-On
Sits low enough to drive onto directly on flat floors. Pair with our ASRP004 ramp level kit for an even smoother transition.
1.9" Raised, Pit Rack Ready
Drops into pit racks and raised platforms for garages that already have the clearance.
1.9" Raised, Pit Rack Ready
Drops into pit racks and raised platforms for garages that already have the clearance.
Pick the profile for your garage.
Same 4-ton capacity, same brass dial, same 1" offset. The only difference is installation height.
Ultra-Low Profile. Direct Drive-On.
At just 0.8" tall, the ASWG004 drives on flat floors directly. Pair with our ASRP004 ramp level kit for an even smoother transition. Ideal for classic builds, lowered cars, and tight-clearance vehicles.
Raised Profile. Pit Rack & Ramp.
The ASWG008 stands 1.9" tall, built to drop into pit racks and raised platforms where you already have elevated clearance.
ASWG004 vs ASWG008 side by side.
See how both profiles compare and pick the one that fits your garage.
Why AutoSolo turn plates.
Die-cast metal, brass dial, real rotational bearings. Built for your home garage.
4-Ton Capacity Per Plate
Each plate supports up to 4 tons of load, handling 8 tons combined when used as a pair. Die-cast metal construction handles passenger cars, trucks, and SUVs.
±60° Rotation Range
The rotating top plate sweeps a full ±60° left and right from centerline, giving you the range needed for caster sweeps without hitting stops or adapters.
Brass Dial, 1° Increments
An etched brass degree dial you can read from any angle. 1° graduations let you read and record angles during camber and caster adjustments.
1" Centerline Offset
The 13-3/8" rotating top plate includes a 1" slide tolerance from centerline. Accommodates lateral wheel travel during steering input so the tire can move naturally mid-sweep.
Smooth Rotational Bearings
Internal rotational bearings carry the plate weight smoothly under full load. Steering input moves through freely without binding, protecting your caster readings.
Locking Pin & Carry Handle
A built-in locking pin holds the plate at 0° for safe drive-on positioning. Integrated carry handles make moving and storing pairs straightforward.
15.75" × 15.75" Footprint
Compact, uniform dimensions fit standard pit racks and alignment setups. Each plate is lightweight enough for one-person setup in a home garage.
Two Profiles, One Standard
Pick ASWG004 (0.8" ultra-low) for flat-floor drive-on, or ASWG008 (1.9" raised) for pit racks and raised platforms. Both use the same brass dial, bearings, and centerline geometry.
Complete Kit. No Extras Needed.
Every pair ships with transition bridges for smooth drive-on access, wheel chocks for secure positioning, and a user manual. Integrates directly into the AutoSolo alignment system.
Add the rear level platforms.
The drive-on turn plates lift the front wheels. For string toe and thrust, the rear needs to sit at the same height. The ASRP004 adds four drive-on ramps and two rear leveling platforms, sized for the drive-on plates, so all four wheels sit level and the whole setup reads flat.
Tools you can rely on. Support you can reach.
Trusted by DIY Mechanics
Used by home garage enthusiasts, classic car builders, and hobby mechanics worldwide.
Tested in Real Garages
Reviewed by automotive creators and DIY alignment builders across YouTube and beyond.
Backed by U.S. Support
Fast help, product guidance, and friendly support from our U.S.-based team.
1-Year Replacement Support
If any manufacturing defects occur, our team will ship a replacement promptly.
CÓMO FUNCIONAN LOS PLATOS GIRATORIOS
Los platos giratorios de alineación de ruedas son las plataformas rotatorias que permiten que las ruedas delanteras del vehículo giren libremente durante el proceso de alineación, eliminando la fricción del suelo que provoca lecturas falsas de convergencia y de cáster. Los platos giratorios AutoSolo están disponibles en dos versiones: el diseño estándar, de aproximadamente 2 pulgadas de altura, y el diseño de perfil bajo, de aproximadamente 1 pulgada de altura, para vehículos con poca altura libre al suelo. Ambos diseños miden 15.75 por 15.75 pulgadas por plato. Cada plato soporta 2 toneladas de forma independiente, con una capacidad combinada de 4 toneladas cuando se usan en pareja. El dial con acabado en latón indica el ángulo de dirección hasta 60 grados a izquierda o derecha desde la línea central, lo que ofrece una referencia clara del ángulo de dirección durante el ajuste de convergencia y de cáster. El plato superior giratorio de 13.375 pulgadas incluye una tolerancia de deslizamiento de 1 pulgada para absorber la variación de vía entre distintos vehículos. Cada pareja se envía con dos bloques de empuje y dos rampas puente de transición incluidos sin coste adicional.
