Serre-roue d'alignement avec adaptateur magnétique
Serre-roue d'alignement avec adaptateur magnétique
Full alignment control.
Single-operator setup.
The ASWG001 Wheel Clamp is the foundation of the AutoSolo Alignment System. Designed to interface seamlessly with gauges, turn plates, and leveling tools, it creates a stable measurement point that makes camber, caster, and kingpin adjustments possible.
Six engineered details. One repeatable mount.
Hover or tap each point to see how the clamp's geometry maintains stability under load.
Fast, Secure Clamping
Smooth-turn adjustment knob allows quick mounting and controlled tightening without over-torquing.
Fast, Secure Clamping
Smooth-turn adjustment knob allows quick mounting and controlled tightening without over-torquing.
Camber and caster, from one setup.
Mount the clamp once, then sweep through both critical alignment angles without re-indexing.
Take Camber Measurement
The ASWG001 provides a stable mounting surface for the camber gauge. When paired with an AutoSolo digital gauge, it lets you adjust camber to improve tire wear and handling.
Take Caster Measurement
Used with AutoSolo turn plates, the clamp enables smooth caster sweep measurements by allowing the wheel to rotate freely while maintaining consistent gauge alignment.
Watch it work in real workshops.
From quick walkthroughs to side-by-side comparisons, see how the ASWG001 performs in real setups.
Why the ASWG001.
Engineered to seat the same way every time, built to outlast a shop floor.
Must-Have Alignment Tool
Alignment wheel clamp securely grips rims from 11 to 25 inches, the mounting point for camber and caster adjustment.
Universal Magnetic Adapter
Included magnetic adapter integrates seamlessly with all magnetic alignment tools, ensuring wide compatibility with any accessory in your wheel alignment kit.
Hunter-Style Pin Adjustment
Hunter-style adjustable pins deliver a stable grip while a robust stainless steel construction guarantees long-lasting performance.
Effortless Length Adjustment
Easy-to-use rotating knob allows quick, simple clamping adjustments, streamlining alignment tasks and improving efficiency.
3D Alignment Ready
Suited for advanced 3D wheel alignment setups, and for the standards expected in automotive repair work.
Chrome-Plated Adapter
The universal adapter is chrome-plated for enhanced durability and a polished finish for dependable use in high-demand environments.
Zeroing Adapter Technique
Use a digital level on the rim's outer edge or a straight rod across the wheel. Compare with the clamp adapter plate's angle and adjust until both match (instructions in manual).
Versatile Applications
Designed to work with various vehicle types, adapting to different rim sizes and alignment requirements, an ideal addition to any alignment setup.
Built to Last
Constructed with a robust stainless steel frame and chrome plating for long-term reliability in any environment.
Tools you can rely on. Support you can reach.
Used by DIYers & Home Mechanics
Trusted by mechanics, enthusiasts, and builders worldwide for consistent alignment results.
Tested in Real Workshops
Used and reviewed by automotive creators and alignment specialists across platforms.
Backed by U.S. Support
Get fast help, product guidance, and expert support from our U.S.-based team.
1-Year Replacement Support
If any manufacturing defects occur, our team will provide prompt support and replacement.
POURQUOI LE SERRE-ROUE COMPTE
Le serre-roue AutoSolo 3D DSP est l'interface de montage entre une jauge d'alignement des roues et la roue du véhicule, et la qualité de son assise détermine directement la fiabilité de chaque mesure prise ensuite. Un serre-roue qui ne se positionne pas de façon concentrique introduit une erreur de faux-rond dans les relevés de carrossage et de chasse, qui se répercute sur le reste de la procédure de géométrie. Ce serre-roue utilise des broches réglables de type Hunter pour créer un contact stable et concentrique avec la jante, et sa molette rotative permet un serrage à une seule main sans repositionnement. La plaque adaptatrice magnétique chromée en façade offre une surface plane et aimantée, compatible avec toutes les jauges d'alignement magnétiques AutoSolo et avec la plupart des instruments magnétiques d'autres marques. Le serre-roue s'adapte aux jantes de 11 à 25 pouces, ce qui couvre les voitures particulières, les camionnettes et les applications sportives. La construction en alliage d'acier assure une durabilité adaptée à un usage répété en conditions exigeantes. La documentation du produit comprend une procédure de compensation du faux-rond à l'aide d'un niveau à bulle, pour des relevés aussi proches que possible des tolérances d'origine.
